Bell & Gossett 1510 BF 11.50 Centrifugal Pump 15 HP 3-Ph 80 GPM, 1800rpm 175 psi
USD 1317.50 USD
Specifications
| Brand | Bell & Gossett |
| MPN | 1510 BF 11.50 |
| Type | Centrifugal Pump |
| Flange Size 2 | 4.75" BCD / 2" ID |
| Flange Size 1 | 6" BCD / 3" ID |
| Rated Power | 15 HP |
| Voltage | 208-230 / 460 VAC |
| MOTOR SPEED | 1460-1800 rpm |
| PHASES | 3-PH |
| Max Pressure | 175 psi |
| Head | 140 Ft |
| Flow Rate | 80 GPM |
| Series | 1510 |
| Impeller Diameter | 11.50 in |
| Connection Type | Flanged |
| Pump Material | Cast Iron |
| Impeller Material | Bronze |
| Motor Enclosure | TEFC |
| Operating Frequency | 60 Hz |
| Shaft Orientation | Horizontal |
| Suction Size | 3 in |
| Discharge Size | 2 in |
| Fluid Type | Water |
| Max Fluid Temperature | 250°F |
| Country Of Manufacture | United States |
| Motor Frame Size | 254T |
| Seal Type | Mechanical Seal |
| Bearing Type | Ball Bearing |
| Drive Type | Direct Drive |
| Base Type | Baseplate Mounted |
| Impeller Type | Closed |
| Specific Gravity | 1.0 |
| Viscosity | Water-like (1 cP) |
| Full Load Amps | 36.8 / 18.4 A |
| Service Factor | 1.15 |
| Insulation Class | Class F |
Here is a Bell & Gossett 1510 BF 11.50 Centrifugal Pump 15 HP 3-Ph 80 GPM, 1800rpm 175 psi. Replaced bearings, seals, wire cover, cleaned and motor has been tested. Unit has some minor external scuffs.